Contact Us+8613812982102

Search
High Density Magnesium Oxide Board for Fireproof Dry Wall

High Density Magnesium Oxide Board for Fireproof Dry Wall

Description

China Magnesium Drywall Board manufacturers. Magnesium oxide board is made of natural materials such as inorganic substances, plant fibers. It is environmentally friendly, healthy, and pollution-free, with no asbestos, formaldehyde and radiation.

Content_1

Content_2

ProInfoAttach

ProDetailSubTitle2

We have established long-term cooperation with clientele from both equally overseas and domestically and get new and old clients' higher comments for Magnesium Sulfate Panel, XPS Sandwich Panel, 20mm Mgo Flooring. Our enterprise operations will be carried out with a complete quality assurance system and excellent after-sales service. Really should any of those products be of interest to you, please letus know.

 





New 1


New 2


New 3


1. Partition

(1) Plate: In general, it is recommended to use glass magnesium board with a thickness of more than 8MM as the partition board.

(2) Accessories: 6mm or more plates are fixed on the frame keel, and 3.5200MM countersunk head galvanized screws are used to fix, the nail head is 0.5MM lower than the board surface, so as to ensure smooth finish.

(3) Installation: When starting the installation, the exact position of the keel must be marked and marked. The center distance of the vertical keel is 450-600MM, and additional keels should be installed at the joints of the wall and both sides of the doors and windows. If the height of the wall is greater than 2440MM, support keels must be installed at the joints of the plates

(4) Board distance: The gap between adjacent boards is 4-6MM, and there must be a gap of 3MM-5MM between the board and the ground. The center distance of the screw installation is 150MM, 10MM from the board edge, and 30MM from the board corner.

(5) Hanging: The heavy objects hanging in the bathroom or kitchen room must be reinforced with wooden boards or keels to avoid damage to the plates.

(6) Seam treatment: There is a gap of 4-6MM between the board and the board during installation. After mixing with 107 glue or strong glue, smear the board and the gap with a spatula, and then paste and flatten it with grid tape.

(7) Paint decoration: it can be sprayed, brushed or rolled, but you must refer to the relevant instructions of the paint when brushing.

(8) Decorating ceramic tiles on the decorative surface: When installing in wet areas such as bathrooms, toilets, kitchens, basements, etc., the distance between the ceramic tile keel on the surface of the board must be shortened to 400MM. The wall must have an expansion joint every three boards (about 3.6 meters).

(9) Acoustic wall: If the wall has a high sound insulation effect, the wall and the plate must be tightly sealed, and then the hollow wall is filled with mineral wool, such as two different thickness boards on both sides of the keel, sound insulation The effect is better.

(10) Anti-impact wall: It is recommended that you select a board above 12-15MM and use longer screws to reinforce it. This method can enhance impact resistance, heat insulation, sound insulation and fire resistance.


 



 

Our High Density Magnesium Oxide Board for Fireproof Dry Wall has a variety of advantages such as fine workmanship, long service life and high cost performance, thus favored by a large number of customers. We continue to innovate, doing business steadily, and strive to bring the best products and services to users. On the basis of introducing and digesting advanced technology, we will independently research and develop and constantly innovate and forge ahead.
Hot Tags: partition wall board material, China, manufacturers, suppliers, factory, Grey Mgo Board, Waterproof Partition Board, XPS Sandwich Panel, Magnesium Oxide Board, Lightweight Ceiling, Interior Mgo Board

You Might Also Like